Skip to main content
Communications is where you set up your business phone in Menaia. You get a phone number (or bring one you already own), decide who each line rings, and choose what callers hear when they call in. Your team then calls and texts from the inbox and the dialer.
Communications is part of Settings, which only Admins can open. To find it, open Settings from the main navigation and choose Communications under General. The page itself is headed Phone.
The page has these parts, from top to bottom:
  1. Add number and Port a number: buttons to get a new number or bring one over from another carrier.
  2. Shared numbers & access: every number your workspace has, grouped by branch, including numbers still being ported in. Click a line to open its own settings.
  3. Workspace call settings: greeting, phone menu, business hours, voicemail, forwarding, ringing, recording, and after-hours handling. These apply to every call your workspace receives. On workspaces in the call flow beta, this part is just the Blocked Numbers list (see Workspace call settings).
  4. Lead source on incoming calls: a single card at the very bottom that decides whether a caller’s lead source shows while the phone rings. It appears for every workspace (see Lead source on incoming calls).
Where your texting and caller ID stand with the phone carriers has its own page in Settings, the Trust center. See Carrier registrations.

Lines

The Shared numbers & access card (marked Admins only) lists every number your workspace has and who is on it. Numbers are grouped by branch, with numbers that have no branch last under No branch. Each group’s heading shows how many numbers and people it has, for example “2 numbers · 9 people”, or “1 number · nobody can use it” when nobody is on its lines. Use the search box (“Search by number, name or people”) to find a line by its number, its inbox name, or the name of someone on it. Each row shows: Below the list, a note reminds you that people only see the calls, texts, and voicemails of the numbers they are on. On workspaces in the call flow beta, a line nobody is on shows “Nobody rings on this number. Calls go to voicemail or the AI receptionist, as its call flow says.” Line statuses: Click anywhere on a row to open that line’s settings. Numbers you’re porting in from another carrier also appear in the list, in their branch’s group, with a dashed outline. They show the number, “Coming over from your current carrier”, a Porting badge (or Rejected), and where the request stands, for example “In progress · Submitted Oct 9, 2026”. You can’t open them until the port completes. See Port a number.

Set up your phone

The first time your workspace sets up its phone, the numbers list says “No lines yet. Set up your phone to get a number for calls and texts.” Click Set up your phone to open a short wizard that gets you a number for calls and files everything for texting with the phone carriers in one place. You answer the questions once, for both calls and texts. Nothing is bought or filed until you submit the last step, and your answers are saved as you go — if you leave partway through, the numbers list shows Finish setting up your phone with a Continue setup button so you can pick up where you left off.
Only an Admin can set up the phone, buy numbers, or file texting. Everyone else sees “Ask an admin to set up your phone.”
The wizard has these steps:
1

Your business

The carriers check these against your IRS records, so enter them exactly as they appear there. Fill in:
  • Legal business name and EIN or tax ID (required unless you’re a sole proprietor)
  • Business website, Business type, and Industry
  • Name on caller ID — what customers see when you call them. Up to 15 letters, numbers, and spaces; phones show it in capital letters.
  • Business address (street, city, state, and ZIP)
  • A contact the carriers can reach: Contact name, Phone number, and Email
2

Your numbers

You get a local number that makes and receives calls from day one and becomes your main texting line once the carriers approve it, usually in 10 to 15 days. Search by area code or city and pick one; it’s held for you for 15 minutes.You can also turn on Include a toll-free number. A toll-free number has its own, faster texting review, so you can text customers within a few days while your local number waits. It’s off by default, and Menaia picks the toll-free number for you when you submit — you can always add one later. A timeline on this step shows when each number starts calling and texting.
3

Fees

When this step is shown, it lists what your numbers and texting cost each month and what’s due when you submit.
4

Review

See everything that will be filed — your business details, your numbers, and your caller ID name — along with What we do when you submit and the setup fees. Click Edit on any part to change it, then Submit and buy numbers (or Submit and buy your number if you didn’t include a toll-free number).
After you submit, a progress screen shows where each part stands. You can leave the page — setup keeps going, and you’re told when texting is on. Your numbers make and receive calls as soon as they’re bought, while the carriers review texting. To follow the review afterwards, see Carrier registrations. New numbers start without a branch. The first number your workspace gets becomes Primary automatically. To assign a branch, open the line and go to the General tab.

Add another number

Once your workspace is set up, click Add number instead. This opens a quick window — there’s no second application to fill in:
1

Pick the kind of number

Choose Local number or Toll-free. The window shows what each can do right away and its monthly cost.
  • A local number joins your existing local registration. If that registration is approved it can text right away; otherwise it makes and receives calls now and texts once the registration clears.
  • A toll-free number gets its own texting registration, filed with your business details, and can text once the carriers approve it, usually in a few days. If Menaia doesn’t have the business details a toll-free number needs yet, the window asks for them before you buy.
2

Choose a number

Search by area code or city for a local number, or pick from the available toll-free numbers. Numbers are held for you for 15 minutes.
3

Buy the number

Click Buy number, then confirm. The number appears in the numbers list and can make and receive calls right away. You see “Number added and ready to use” when it can also text right away, or “Number added” with a note on when texting starts.
Add number is unavailable while your workspace’s first number is still being bought. The reason, “You can add more numbers once your first one is set up.”, shows under the button.

Carrier registrations

Where your texting and caller ID stand with the phone carriers is shown on its own page: open Settings and choose Trust center under General. Registrations cover your whole workspace, not one line, so they aren’t on this page. The Trust center has one section for each toll-free number, one for your local numbers, and one for caller ID, each with its status and the one action it needs: filing again, registering your local numbers, or choosing your caller ID name. See Trust center for every status and action.

Line settings

Click a line to open its page. At the top you see the line’s name with its badges, plus its number and branch. Three buttons sit next to them:
  • Back to Communications returns you to the main page.
  • Open inbox takes you to the inbox.
  • Test call calls the line from your dialer.
The line page has General, People, Line hours, and Call handling tabs. Workspaces in the call flow beta also get a Call flow tab and an AI receptionist tab (see Call flow and AI receptionist).

General

Change what you need, then click Save Changes at the bottom of the tab. A message confirms the line’s settings saved. Workspaces in the call flow beta also see these on the General tab:
  • Greeting, voicemail, forwarding and auto-text with an Open call flow button, because all call routing for the line lives in its call flow.
  • A Call recording card with Record incoming calls and Record outgoing calls for this line. Callers hear “This call may be recorded for quality and training purposes.” before they’re connected.
  • A Call intelligence card with Transcribe recorded calls (a transcript for every recorded call; recording must be on for that direction) and AI call summary (a short summary and next steps from the transcript; needs transcription on). These use Meni tokens.

People

People on this number lists who works this line. Every setting on this tab saves as soon as you change it. To add someone, click Add person or role and pick from either list:
  • Roles: every person in that role is on the line, and anyone added to the role later is included too. Each role shows how many people in the branch have it.
  • People: only people in the line’s branch appear. If everyone is already on the line, you see “Everyone in branch is already on this number”.
Tick what each person or role can do on this number. Each row has these columns: Masked hides personal numbers both ways. When a masked person calls a client from a job, the client sees the line’s masking number instead of the person’s cell, and the masked person never sees the client’s cell either. Turn it on for a role and everyone in that role is masked. A masked person has no inbox, so Answer, Calls, Texts, and Voicemail switch off and lock. Only Recordings stays available. You also can’t set a ring order for a masked row. To choose which number clients see and whether masked calls are recorded, go to Call handling.

How ringing works

When someone calls a line that has people on it, Menaia rings down the Ring order:
  • One slot at a time. Each row is one slot. If nobody picks up, the call moves to the next slot. The ring time for each slot is Wait before forwarding, found under Ring behaviour.
  • A role rings as a group. A role’s slot rings everyone in that role at the same time. If the line has a branch, only people in that branch are rung.
  • Only some rows ring. A row rings only if Answer and Calls are both on and Masked is off.
  • Some people are skipped. Anyone who has set themselves unavailable is skipped. Nobody is rung twice, even if they’re on the line both by name and through a role. At most 10 people are rung per call.
  • Nobody answers. The call goes to your queue (if Hold callers in a queue is on) or to voicemail.
  • Nobody is available. If the line has people who could ring but none of them are available, Menaia doesn’t fall back to anyone else. The caller is held in the queue if the queue is on. Otherwise they hear that no one is available and the call ends.
If a line has nobody who can ring (no people at all, or no row with Answer and Calls on and Masked off), calls ring your workspace’s Client Coordinators instead. The line’s branch coordinators ring first, and if the branch has none, coordinators across the workspace ring. The names in the numbers list come from this same group.

Line hours

Set Opens and Closes for each day, or tick Closed. Then click Save Changes. This schedule belongs to the line and is separate from your workspace business hours.

Call flow and AI receptionist

These two tabs appear only for workspaces in the call flow beta. Call flow opens a visual editor for routing calls on that line — its greeting, phone menu, ringing, voicemail, and after-hours handling. AI receptionist sets up an AI that can answer the line’s calls, take messages, qualify leads, and book estimates on the schedule. They’re rolling out gradually, so if you don’t see them they aren’t turned on for your workspace yet.

Call handling

This tab has three cards. Call masking applies to everyone marked Masked on the People tab. These settings save as soon as you change them. Greeting holds the message callers hear when they first reach the line. Type it into Greeting message and click Save Changes. Blocked Numbers has a switch that turns number blocking on or off for the line. The list below it is shared across your whole workspace, so a number you add here also appears on the Communications page. See Blocked numbers.
Right now, incoming calls follow your workspace greeting, business hours, and blocked-number switch, not the ones on a line’s tabs. The same goes for masked texts: the per-line setting is saved but texting doesn’t use it yet. On workspaces in the call flow beta, the Call handling tab shows only Call masking, because the line’s call flow plays its own greetings. What the client sees and Record masked calls already apply to outgoing calls.

Workspace call settings

Below the numbers list, a set of cards controls how your workspace handles calls. Change what you need, then click Save Changes at the bottom. The Blocked Numbers switch and list are the exception, since they save immediately.
On workspaces in the call flow beta, each line handles its own calls through its call flow, so these cards aren’t shown. The only one left below the numbers list is Blocked numbers, because blocked callers are turned away before a call reaches any line.
The cards appear in this order.

Greeting

Greeting message is what callers hear when they first reach you. It plays together with the phone menu, so callers hear it when the phone menu is on.

Blocked numbers

Use this to block specific numbers from calling your business. Blocked callers hear a busy signal.
  • Use the switch in the card header to turn blocking on or off.
  • To block a number, click Add Number, enter the Phone number and an optional Label/reason (for example “Telemarketer”), then click Block Number.
  • The list shows each Phone Number, its Label/Reason, and the Date Added. Click the trash icon to unblock a number.

Phone menu (IVR)

A phone menu lets callers press a key to reach the right place. Tick Enable the phone menu, then click Add menu option for each key. Each option has:
  • Digit: a key from 0 to 9. Each digit can be used once.
  • Action: what happens when the caller presses that key. See the table below.
  • Label: a name for the option, for example “Sales”.

Business hours

Choose a Timezone, then set Opens and Closes for each day or tick Closed.
Business hours and the After-hours behavior card are checked when the phone menu is on. Callers who reach you outside your hours get the after-hours treatment instead of the menu. When the phone menu is off, calls ring the same way at any hour.

Voicemail

Tick Enable voicemail and write a Voicemail greeting. When nobody answers, callers hear the greeting and can leave a message. If voicemail is off, they hear that no one is available and the call ends.

Missed-call auto-text

Turn this on to send a text back to callers you miss, so you don’t lose the lead. Write the message in Message template. It can be up to 640 characters, and the counter shows your length against a single 160-character text. You can’t save with the switch on and the message empty.
The template has buttons that insert Caller first name, Business name, Booking link, and Missed-call time placeholders. These placeholders aren’t filled in when the text goes out yet. For now, write a message that reads well exactly as typed.

Forward to phone

Turn this on to send business calls to a cell phone, so calls still get answered when nobody is at a desk. Enter the number in Forward to. You can’t save with the switch on and no number. Next to the number you’ll see Verified once your workspace has an active business number. Because forwarding is a calling feature, it doesn’t wait on carrier text-message registration — as soon as a line is active you can forward calls, even while that number’s registration is still under carrier review. Until a line is active, you’ll see “Not verified — activate a business number to forward calls”. If the forwarded call isn’t answered either offers Send to business voicemail and Hand to the AI receptionist.
When forwarding is on and a call doesn’t go through the phone menu, it goes straight to the forwarding number. If nobody answers there, the caller goes to your queue (if it’s on) or to business voicemail. That happens whichever option you pick above.

AI receptionist

The AI receptionist can answer business calls on its own: it greets callers, takes messages, captures callers as leads, and hands them to your team. Turn the section on with its switch, then set it up.
The receptionist draws from your workspace’s Meni token balance. If that balance is empty, it can’t answer, and the caller goes to voicemail instead. See AI features and limits. On workspaces in the call flow beta, these workspace call settings aren’t shown; set up the receptionist for each line on its AI receptionist tab instead.
After the receptionist handles a call, it shows up in the inbox as an AI receptionist answered entry with a short summary and the full transcript. When it takes a message, captures a lead, or transfers a caller, the people on the line are notified. See Review calls and voicemails.

Ring behaviour

Incoming and outgoing call recording

These are two separate cards. Turn one on to record every call in that direction automatically, with no action needed from your team. It’s best practice, and required in some regions, to tell people a call is recorded. Each card has a Custom message (optional) box for this:
  • Incoming: callers hear the message as soon as they call in.
  • Outgoing: the person you call hears it when they answer, before they’re connected.
If you leave the box blank, callers hear the default message: “This call may be recorded for quality and training purposes.”

After-hours behavior

This card sets what happens when someone calls outside your business hours. Under Behavior, choose one:
  • Send to voicemail
  • Play a message, which plays the After-hours message you write and then ends the call.

Lead source on incoming calls

At the very bottom of the Phone page, the Lead source on incoming calls card controls whether a caller’s lead source is shown while the phone rings. This card appears for every workspace, including those in the call flow beta. Turn on Show lead source on incoming calls and, when Menaia knows where a caller came from, their lead source — such as Yelp or Google Ads — shows as a tag under the caller’s name on the ringing and active call screens, on the web and in the mobile app. The source comes from one of two places:
  • A CallRail tracking number the caller dialed, when you’ve connected CallRail. Each tracking number stands for a marketing channel, so the tag tells you which one brought the call. See Integrations.
  • Otherwise, the Lead source set on the line the caller reached, from the line’s General tab (see General).
The switch is on to start. Turning it off hides the tag only: callers and leads still get their lead source either way, and leads you create from those calls keep it.

Port a number

Use Port a number to bring a number you already own over from your current carrier. The Port a number button sits next to Add number at the top of the page.
The Port a number button stays disabled until texting is turned on for your workspace — that is, until you’ve set up your phone. A ported number follows the kind of number it is: a ported local number joins your registration for local numbers, and a ported toll-free number gets its own texting review. Until texting is turned on, you see “Porting unlocks once texting is turned on. A ported local number joins your registration for local numbers, and a ported toll-free number gets its own texting review.” under the button.
1

Open the port window

Click Port a number at the top of the page.
2

Check each number

Under Numbers to port, enter a number and click Check.
  • If it can be moved, you see “number can be ported”. Click Add to request.
  • If it can’t, you see “number cannot be ported.” followed by the reason. When no reason is given, you see “The current carrier does not support transfers.”
Repeat for every number you want to move. Remove one with its X button.
3

Enter your current carrier details

These must match your current carrier’s records exactly.
  • Carrier name, Account number, Authorized contact name (the full name on the account), and Service address (the address on file with the carrier) are required.
  • Transfer PIN is optional unless a number’s carrier requires one. In that case it’s required, and the field says “Your current carrier requires a PIN to release this number”.
4

Upload documents

Upload a Signed letter of authorization (LOA) and a Recent carrier bill. Both are required. Each must be a PDF, JPEG, or PNG up to 10 MB.
5

Submit

Click Submit port request. You see “Port request submitted”, and each number in the request appears in the numbers list with a Porting badge.
While a number is on its way, its row in the numbers list shows where the request stands and the date it was submitted, for example “Submitted Oct 9, 2026” or “In progress · Submitted Oct 9, 2026”. A ported number starts without a branch, and it becomes Primary if it’s your workspace’s first number. To assign it a branch, open the line and go to the General tab.

Which line outgoing calls use

When someone places a call from anywhere in Menaia, the call goes out on one of your active lines. Menaia picks the line in this order:
  1. The line the conversation is tied to, if the caller is on that line.
  2. Otherwise, the caller’s own line. If they’re on several, their Primary line wins, and if none of those is primary, the one added first does.
  3. If the caller isn’t on any line, the workspace’s primary line, or the active line added first if there’s no primary.
Being on a line through a role counts. If the caller is Masked on the chosen line, the client sees the line’s masking number, and the call is recorded when Record masked calls is on. For how your team places and takes calls, see Make and take calls.

Who can do what

What’s next

Inbox

Read and reply to texts and calls for the lines you’re on.

Make and take calls

Place and take calls from anywhere in Menaia.

Trust center

See where your texting and caller ID registrations stand with the carriers.